Why TPO on a pueblo roof
- Reflective: bright white surface keeps the roof cooler in summer
- Heat-welded seams: seams are fused, not glued
- Clean installs: a good fit after tearing off an old tar and gravel or failed foam roof
- Tapered insulation under the membrane can build slope toward canales
The details that make or break it
Most TPO leaks on pueblo homes aren't in the middle of the roof. They're at the edges. We pay close attention to:
- Running the membrane up and over the parapet, or terminating it properly under coping
- Pre-formed corners and patches at inside and outside corners
- Canales set into the membrane so water flows in, not under
- Flashing skylights, vents, cooler stands and pipe boots
- Walk pads where people service coolers or solar
TPO or foam?
Foam is seamless and insulates, and it's easy to repair and recoat. TPO doesn't need recoating on a schedule and is very reflective. If the old roof is coming off anyway, TPO is often a strong choice. If the old roof is dry and can stay, foam may cost less. See the comparison guide.
Cost
TPO on Albuquerque homes commonly runs about $8 to $14 per square foot including tear-off and insulation, depending on roof size and detail work.
Call us for a free look at your roof. You get photos of what we find and written pricing before any work starts.
Common questions
How long does TPO last?
Commonly 20 years or more with good installation and maintenance.
Can TPO go over foam?
Sometimes, with the right cover board, if the foam is dry. Often the old roof is removed first.
Is TPO noisy in hail?
No more than other flat roofs. Hail can damage any roof, and a proper inspection after big storms is wise.